|
Engine & Components: 540 Big Block Chevy Merlin
Block, Callies Crankshaft, Eagle H Beam Rods with L19
Bolts, Wiseco Pistons 14.2 measured compression ratio,
Dart Pro 1 Heads ported to 335cc intake runner, Manley
Stainless Steel Valves and Nexteck Springs, Comp Cams
custom grind 285/290@.050 800/782 lift, Isky Roller
Lifters with pin oiling, Crane Roller Rockers SSRE Stud
Girdle, Moroso Full Kick-Out Oil Pan, ATI Super Dampener,
MSD Crank Trigger, Gold 7al box Pro Power Coil, Edelbrock
Super Victor intake port matched to heads, Holley 1050
Dominator Carburetor, Lemmons Step Headers 2.25 to 2.375
with Collector Mufflers...
Transmission: TH 400 Transmission, Stock Shafts and
Gears with roller thrust bearings, 34 Element Intermediate
Sprag and Low Sprag, A-1 8in Converter and Transmission
Brake, JW SFI Bellhousing and Transmission Blanket, PST
4in Aluminum Drive Shaft with 1350 U-Joints...
Chassis & Body: 1970 Chevrolet Chevelle SS (donor
track-use only), Chris Alston Chassis Works 4 Link Back
Half Frame Kit, Fab 9 Rear Housing, Mild Steel 14 point
Roll Cage Kit 8.50 Certified, Aluminum Front and Steel
Mid Motor Plates, Stock Front Crossmember modified for oil
pan clearance, Rack and Pinion Steering, 4.10 Pro Gears,
Strange Engineering Center Housing, Pinion Support and
Yoke, Mark Williams 35 Spline Spool and Axles with Drive
Studs, 4 Wheel Aerospace Components 4 Piston Caliper Disk
Brakes, Global West Upper Control Arms for 6 degrees
caster, 4 New Hoosier Tires, Weld Wheels, Fiberglass Hood,
Trunk lid and Bumpers, Lexan Windows, Additional Paint
Matched Hood with Scoop and Card Pan, 2nd set of removable
Mufflers and Engine Catch Pan/Diaper for local track
rules, 3200 lbs, Chassis Cert, Belts, Bellhousing,
Blanket, Flywheel, Tires, Shocks, Drive Shaft and both
Batteries new 2022/23... |
