Top image 1 Top image 2 Top image 3 Return to our home page Contact Us Site Map Header image top right
Spuds Garage Spuds Garage Spuds Garage
Bottom header 1 Bottom header 2 Bottom header 3 Phone Number
SITE NAVIGATION  

Spuds Garage Designer

ADVERTISE HERE


Spuds Garage Featured Vehicle

1996 Harley Davidson FLH "Nickel Bagger"

Vehicle: 1996 Harley Davidson FLH "Nickel Bagger"

Owner: John
Contact Brian

Location: Lake Havasu City, Arizona

Email: Click Here

Phone: 208-890-0337
Description

"Subtle is as Subtle Does"! Stealth perfection at it's finest, after countless hours of professional craftsmanship and creativity, this stunning "Nickel Bagger" was 1st shown at Harley Davidson's 95th Anniversary Blowout in Milwaukee, Wisconsin & later captured by Big Twin Magazine's 11/98 edition...

Boasting hundreds of hours by Henry Wehr of Autosport Engineering Santa Barbara, California and custom paint by Butch Brinza, it's low rise handmade all aluminum rear tour-pak is electrically moveable fore/aft and/or completely removable along with saddlebags but that is not where it stops, make sure you read the enclosed magazine feature and study the photos. Simply amazing, must see...

Please visit our detailed 44+ high resolution photos. We welcome your call anytime, specific questions and/or purchase consideration. No Disappointments...

Equipment

Front-End: Custom fender & fog lamp brackets, lowered front suspension, tri-bar headlamp, mesh hidden turn lamps, internal fairing mirrors, electronic speedometer, custom aluminum lower chin & frame cover, custom lowered forward controls & foot rest, hidden shift linkage, Sturgis polished billet wheel, hidden oil filter & regulator, custom aluminum gas tank console (pop-up remote release)...

Rear-End: Handmade fiberglass saddlebags (remote release), handmade aluminum rear tour-pak (remote release, adjustable, removable/replaceable w/license bracket), single or dual seat, removable passenger foot pegs, modified rear spill bars & side covers, widened rear fender, custom handmade tail lamps (glass/aluminum), lowered suspension, progressive adjustable shocks, Sturgis polished billet wheel and Performance machine brakes...

Engine & Etc: 1997 S&S built by RAS, 103 cubic inch, Hemi design cylinder heads (hexed & diamond cut), Wiseco pistons, Red Shift 655 Camshaft, Baisley Valves, Jims lifters, roller rockers, Crane adjustable push-rods, S&S crank/rods, Crane single fire ignition, custom Autosport air-filter & exhaust, 6 speed trans w/back-cut gears and Black Nickel plating...

Known Facts  

Free and Clear Private Party Titled
Respectfully Asking $32,500 No Trades Desired


PHOTOS
Presentation Photos

Please Read: All Vehicles posted on this website are Sold “As-Is Where Is” by the respective owner(s). We have personally documented, operated, photographed and verified ownership of all the vehicles posted within, every attempt has been made to describe all vehicles correctly (visually 60 Posted photos, verbal and written communications). Statements of history, repairs, condition and/or equipment etc are that of the actual owner. Prior to placement, every owner/seller has Proof Read the advertisement and approves of the description/statements within. Any vehicle 10 years old or older is considered exempt by federal government mileage standards and most classics are titled with miles as exempt. We will be happy to answer all questions from a serious buyer/bidder and you do have a right to an in person inspection prior to full payment...

Questions? Contact Brian 208-890-0337



       ©Copyright 2016 - 2022- SpudsGarage.com, All Rights Reserved
Footer
spacer spacer spacer spacer spacer spacer spacer spacer